info@wrenchitup.ca

DIY Fridge Water Line Installation: Save Money And Hassle Without Calling A Plumber!

Wrench It Up > Academy > DIY > DIY Fridge Water Line Installation: Save Money And Hassle Without Calling A Plumber!

Installing a water line for your fridge can seem like a daunting task, but it is actually a relatively simple DIY project that you can do yourself without calling a plumber. Here are ten steps to guide you through the process:

1. Turn off the water supply to the area where you will be installing the water line.

2. Choose a location for the water line, preferably one that is close to a water supply.

3. Drill a hole through the cabinet or wall behind the fridge to run the water line.

4. Measure the length of the water line needed and cut it to size using a pipe cutter.

5. Attach a compression fitting to one end of the water line and connect it to the fridge.

6. Connect the other end of the water line to the water supply, using a tee fitting to tap into the existing water line.

7. Tighten all the connections with a wrench to ensure they are secure.

8. Turn the water supply back on and check for leaks.

9. If there are no leaks, plug in the fridge and allow it to cool for several hours before using the water dispenser or ice maker.

10. Enjoy the convenience of having fresh, cold water and ice readily available without the added expense of hiring a plumber.

By following these steps, you can save money and avoid the hassle of calling a plumber to install a water line for your fridge. Just be sure to take your time and follow all safety precautions to ensure a successful installation.

If you may need to call a professional plumber in Toronto, we are here to help. Just give us a call now!

Wrench It Up – WIN YOUR HEART!