info@wrenchitup.ca

From Bowl To Throne: A Comprehensive Guide To Toilet Installation!

Wrench It Up > Academy > DIY > From Bowl To Throne: A Comprehensive Guide To Toilet Installation!

Toilet installation might seem like a daunting task, but with the right tools and instructions, it can be done by any DIY enthusiast. Here is a step-by-step guide on how to install a toilet:

Step 1: Remove the old toilet – Turn off the water supply to the old toilet and flush it to empty the bowl and tank. Disconnect the water supply line and loosen the bolts that hold the toilet to the floor. Remove the toilet and the wax ring.

Step 2: Prepare the area – Clean the flange and the area where the toilet will be installed. Check if the flange is level and secure any loose screws or bolts.

Step 3: Install the wax ring – Place the wax ring on the flange, making sure it is centered. If necessary, use extra wax to make sure it seals correctly.

Step 4: Install the toilet – Place the toilet bowl over the wax ring and align it with the flange bolts. Press the bowl down to secure it in place. Install the tank and secure it with bolts. Tighten the bolts until the toilet is stable.

Step 5: Connect the water supply – Connect the water supply line to the bottom of the toilet tank. Turn on the water supply and check for leaks.

Step 6: Seal the base – Apply a thin bead of caulk around the base of the toilet to seal it to the floor.

Step 7: Test the toilet – Flush the toilet and check for leaks. Check the toilet’s stability and ensure that it is level.

In conclusion, toilet installation might seem intimidating, but with the right tools and instructions, it can be done easily. By following these steps, you can install a toilet and upgrade your bathroom like a pro.

If you may need to call a professional plumber in Toronto, we are here to help. Just give us a call now!

Wrench It Up – WIN YOUR HEART!