info@wrenchitup.ca

How To Deal With A Blocked And Leaking Kitchen Drain Assembly?

Wrench It Up > Academy > DIY > How To Deal With A Blocked And Leaking Kitchen Drain Assembly?

Dealing with a blocked and leaking kitchen drain assembly requires some basic plumbing knowledge and a few tools. Here are some steps you can follow:

1. Turn off the water supply: Before you start working on the drain assembly, turn off the water supply to the kitchen sink. You can usually do this by turning the shutoff valve located under the sink clockwise.

2. Remove any visible blockage: If you can see any debris or food particles blocking the drain, try removing it using a pair of pliers or a drain snake.

3. Use a plunger: If the blockage is not visible, try using a plunger to dislodge it. Make sure the plunger cup covers the drain completely and create a tight seal around it. Push and pull the plunger forcefully several times to create suction and dislodge the blockage.

4. Use a drain cleaner: If the plunger does not work, you can try using a drain cleaner. Follow the instructions on the cleaner carefully and use protective gloves and eyewear. Remember to never mix different drain cleaners, as this can cause dangerous chemical reactions.

5. Check for leaks: After you have cleared the blockage, turn on the water supply and check for any leaks in the drain assembly. If you find any, tighten the connections or replace any damaged parts.

6. Prevent future blockages: To prevent future blockages, avoid pouring grease, oil, or other fatty substances down the drain. Also, use a sink strainer to catch any food particles and clean it regularly.

If you may need to call a professional plumber in Toronto, we are here to help. Just give us a call now!

Wrench It Up – WIN YOUR HEART!